AC 3 x 333KW

DC Auto

AC Hire 500KW

Server Simulators

eLeaflet

AC and DC Hire load banks

All load banks in the hire fleet have been designed and manufactured by Hillstone using our extensive knowledge and experiance of battery, UPS & genset testing.

Operating from rental depots in UK & UAE we strive to ensure our hire service is always delivered to the highest standards and according to our ISO9001:2008 quality assurance policy.

Our load bank hire service includes: delivery, collection, installation, cable laying and equipment operation. Our principals and goals are to ensure the completion of the testing leaves the customer 100% satisfied and hopefully using Hillstone again in the near future.

AC RENTAL LOAD BANKS

The AC hire load banks cover a range from 19"KW rack mounted load heaters to portable load banks and road trailer mounted loadbanks. All units are supplied with cable sets for load ratings from 4KW to over 4000KW. The Hillstone AC loadbanks utilise our intelligent hand held controller to give flexible parallel control of multiple units.

The range of AC available individual load banks include:

AC Load banks	Voltage ( V )	Power ( KW )
Server simulator 19" rack mounted	240V 1ph	4KW & 6KW
Hand carry	240V 1ph	15KW & 33KW
On castor wheels	208V 3ph	160KW
Hand carry	415V 3ph	19KW & 30KW
Portable units	415V 3ph	40KW
On castor wheels	415V 3ph	100KW
On castor wheels	415V 3ph	200KW
On castor wheels	415V 3ph	300KW
On UK road trailer	415V 3ph	500KW
On castor wheels	415V 3ph	650KW
On UK road trailer	415V 3ph	1000KW

DC RENTAL LOAD BANKS

Hillstone have invested to establish the largest range of rental DC load banks in both the UK and the Middle East from Dubai.

With units ranging from 12V to 600V, we can cover all your battery testing requirements, supported with available expert advise.

The range of DC available individual load banks include:

DC Load banks	Voltage ( V )	Rating
Automatic control	12V to 260V	13KW
Automatic control	12V to 60V	up to 150A
Hand carry	12V to 30V	up to 600A
Hand carry	12V to 60V	up to 600A
Dual Voltage	60V to 120V	18KW
Hand carry	110V to 140V	up to 430A
Dual Voltage	130V to 260V	57KW
On castor wheels	260V	up to 300A
Hand carry	260V	30KW
Hand carry	450V	30KW
On castor wheels	480V	up to 375A
Hand carry	600V	up to 55A

---

Regular load bank testing of generators provides an essential health check service to prevent diesel engine failure due to wet stacking. Wet stacking occurs due to under loading of the genset which results in wet un-burned fuel building up in the engine. This fuel build up will over time line the combustion chamber cylinders and cause a reduction of the engines rating and efficiency which will ultimately cause premature failure of the generator. Running the generator on load of 50% - 100% of the genset rating will allow the engine to reach the recommend operating temperature, which will burn off the choke deposits. Hillstone and our partners can provide preventive maintenance programs upon request.

---

Discharge testing is the approved method to determine the capacity of Lead acid and (Nickel Cadmium) Ni Cad/Ni Cd batteries, as recommended by all battery manufacturers such as Enersys, Exide, C&D Technologies, Hawker, Yuasa, Exide, Hoppecke, Saft, Varta, and in accordance to BS6290 part 4 / IEC TR 62060.

---

Legal Notice: Information published is for the public domain and permission is given to view and download datasheets and other product information at our discretion. All information published remains the intellectual property rights of Hillstone Products Limited as protected under the laws and jurisdiction of the United Kingdom. You are forbidden to copy, reproduce any designs for commercial gain without prior written agreement by Hillstone Products Limited. Information is given in good faith and accurate at the time of publishing.

---